Straight out of the box and onto your wall (well almost)!
Wall Art Rockers include the all the wall fixings and fittings you need to get your wall art on the wall as quickly and as easily as possible.
Full instructions are provided with your Wall Art Rocker but below is a brief step by step summary showing how simple it is.
STEP 1 - Positioning
Position the paper template in the desired location and fix to the wall using a low tack tape such as artist's masking tape.
Ensure the template is at the correct height and check it is perfectly level using a spirit level. Reposition if necessary.
STEP 2 - Drilling
Drill 4 holes (marked on the template with cross hairs) to the correct depth. Once complete insert the wall plugs.
STEP 3 - Attach Wall Stud Chambers
Take down the paper template and remove wall stud screw caps (A) from the
wall stud chambers (B). Screw all four wall stud chambers to the wall.
STEP 4 - Hang the Wall Art Rocker
Carefully remove your acrylic wall art from its packaging. Align the wall art drill holes over the wall stud chambers, insert the screw caps and tighten.
These instructions are summary guidelines only.
Full hanging instructions are provided with your Wall Art Rocker.
Step 1: Positioning
Step 2: Drilling
Step 3: Attach Wall Stud Chambers
Step 4: Hang the Wall Art Rocker